LabMaster Universal Length Comparator from Pratt & Whitney Measurement Systems, Inc. | Gage Block, Ring, Thread Pitch, Taper Plug

With instrument uncertainty to 2 millionths of an inch (50 nanometers), the Labmaster Universal - Model 175 is suitable for virtually all Internal (ID) and external (OD) measuring applications. This laser-based universal length measuring system (ULM) has been developed by Pratt & Whitney for gage calibration laboratories that need to precisely measure length, outside diameter, inside diameter, pitch diameter, lead, major/minor diameter, taper, linear displacement, and thickness.

High accuracy is maintained by its laser interferometer, zero Abbe offset design, and large measuring table with center position, height, pitch, and yaw controls. The computer-controlled precision air bearing slide and gaging fingers remove operator-influenced errors commonly observed with traditional gaging methods by maintaining constant force. It also greatly minimizes wear and tear to both the measuring standards and the instrument.

The ULM is capable of measuring gage blocks, end standards, plain rings, threaded rings & plugs, API gages, pin & plug gages, tapered plugs, cylindrical setting gauges, micrometers, indicators, LVDTs, calipers, and snap gauges with instrument uncertainty to 2 millionths of an inch (0.05 micron). It is suitable for virtually all ID and OD applications through its wide 0.020-inch (0.5 mm) to 14-inches (356 mm) measuring range. The ULM includes Pratt & Whitney’s GageCal software that automatically enters tolerances for rings, plugs, pins, balls, threads (calculates pitch/major diameter) and flags out of tolerance conditions.

The Labmaster Universal - Model 175 is also a popular measuring instrument in the bearing industry. The five basic types of anti-friction bearings can easily be measured on the ULM. They include: tapered bearings, needle bearings, ball bearings, spherical bearings, and cylindrical bearings. Measuring characteristics include: internal diameter, external diameter, outer raceway diameter, inner raceway diameter, radial internal play (radial internal clearance) and axial internal play (axial internal clearance). Please visit our Pratt & Whitney Bearing Measuring Instrument.

Other specialty measuring applications include: gears, shafts, optics, film thickness, automotive parts, aerospace parts including aircraft engine parts, and your precision components can all be measured on the ULM.

The LabMaster Universal measures:

Your Precision Parts
Spheres
Ring Gages
Gage Blocks
Setting Masters / Setting Gauges
End Standards / Ball Bars for CMMs
Threaded Rings & Plugs
Tapered Rings & Plugs
Pin & Plug Gages
Pipe Threads (API)
Cylindrical Setting Gages
Ball Bearings
Roller Bearings
Shafts
Micrometers
Dial/Test Indicators and Dial Calipers
LVDTs
Electronic Vernier Calipers
Snap Gages
Taps, Dies, and Cutting Tools
Feeler Gages
Gears/Splines
Dial Bore Gages / Swing Gages

Popular Measuring Options:

Dial Bore Gage Kit
Step Gages / Gauge Bars / Surveillance Masters for CMMs
Radial Internal Clearance (RIC) kit / Radial Play Gage
Axial Internal Clearance (AIC) kit / Axial Play Gage
Coordinate Measuring Machine Masters
Internal and External Thread Gages
Gear / Spline Accesories

Specifications:

Model / Part #	LMU-175 (U306270)
Table Axes of Motion	Elevation, Center, Tilt and Swivel
Accuracy	2 + 0.5L µinch	0.05 + 0.5L µm
Repeatability	1.6 µinch	0.04 µm
Measurement Range: Internal	0.02 to 14 inches	0.5 to 356 mm
Measurement Range: External	0 to 13 inches	0 to 330 mm
Direct Reading Range	7 inch	175 mm
Measuring Force (std.)	0.5 oz.	14 g
Measuring Force (optional)	2-40 oz.	50-1100 g

Additional Models:

Labmaster Universal - Model 1000A
Labmaster Universal - Model 1000M

| | Share